What is Proctortrack?

Proctortrack is the automatic remote proctoring solution your institution has selected for use during online exams.  More information about Proctortrack’s privacy policies and technologies used can be found on our website. 



How does it work?

The following guide will assist you, the student, in going through the process of taking a proctored exam with Proctortrack.  Remember if you ever have any additional questions, you can call 1 (844) 753-2020  or go to www.proctortrack.com for additional information and live chat.


Why Onboarding?

Often students are unsure if their specific hardware setup will allow them to use Proctortrack.  While a detailed list of supported operating systems and browsers is available on Proctortrack.com, students often prefer to just test their system themselves.  Keep in mind that Chrome and Firefox are the recommended browsers.  While Proctortrack will work in other browsers, the user experience is far superior in Chrome.  


The onboarding process allows students to ensure everything is working correctly during low-pressure circumstances.  It also gives students time to make any changes to their system well before the first exam.  


Students can fail onboarding for the following reasons:

  • Facial scan missing or insufficient

  • ID scan missing or insufficient

  • ID scan shows invalid ID

  • Knuckle scan missing 

  • Environment lighting insufficient


If a student fails the onboarding exam, they will receive a notification listing the specific reasons for failure and be asked to retake the onboarding exam.


For students onboarding appears the same as a normal exam, to help familiarize them with the testing environment.   


If you have any questions, please do not hesitate to contact Verificient support:




What do I need to take an exam using Proctortrack?





How to Take an Exam Using Proctortrack?



1.a Visit the Pepperdine-Sakai web portal and click “Pepperdine Login”  in the top right corner.




1.b Log in to your Pepperdine (Sakai) Student account by entering your credentials.




2. Select the desired course from the top of the start page.




3. On the menu on the left, click on the "Proctortrack Dashboard" link




4.a This is the Proctortrack Student Dashboard. On the top, you have the Onboarding status. The Actual tests cannot be attempted unless the Onboarding profile is approved. An onboarding profile can be created by attempting the Onboarding test. The Onboarding test is a sample test.


Every Test-taker needs to have an approved Onboarding Profile, before attempting any actual Tests.





4.b On the Proctortrack Student Dashboard, you have the list of the tests below. Click on the “Go to Test” button for the test you would like to attempt. Here we will first attempt the Onboarding test.


The Process for attempting the actual tests is the same as the Onboarding test.




5. Read the “How it works” tab on the top, to further understand the steps required. Click the “Next” button to scroll through the steps.



6. Scroll down to go through the“Let’s Get Started” section, to understand the guidelines for a proper testing environment.




7. Scroll down further to find the “General Guidelines” section. These are generic exam guidelines for the test-takers understanding.




8a.  Scroll down again to find the 'Instructor 's Guidelines for the Current Test'  

                                                                                   


8b.  After getting familiar with all the guidelines, check the box (at the bottom) labeled “ I have read, understand, and will adhere to the required environment guidelines.” Click Go To Next Step.


9a. Proctortrack will attempt to automatically download and connect, otherwise click the ‘Download Proctortrack’ button to download the app.




9b.  Open the Proctortrack.zip/Proctortrack.exe file that downloads.



10a. Finally, launch Proctortrack from your downloads folder to continue.



10b. Pay attention to the banner messages displayed (see the image below). If you have already downloaded the application a pop-up will be prompted, you could click on Open Proctortrack



10c. If it takes longer than 10 seconds to initiate the app, follow the instructions on the screen.

Step 1: Go back to the browser (you can drag the app to the side).

Step 2: Click on the Connect to Proctortrack button.

Step 3: Come back here and click anywhere inside the app.





Using Proctortrack: -



1. You will be redirected to the “Agreement to Policies”. Please read the agreement policies, check the box below, and then click on “I AGREE”.

                                  


2a. A 7-point System Check will automatically run to verify that the system is ready.



2b. Once the System Check is successfully conducted, click “CONTINUE” to start your onboarding. Follow the prompts till you reach the Face and ID scan.



2c. You will be prompted to verify your identity. Ensure to read the information provided on the screen, then click on Continue to proceed.



3. You will now be prompted to complete a Face Scan. Click Start Scan and follow the instructions displayed on the page to ensure a proper face scan is captured.

   



4. If the face scan is blurry click on Retake to capture again. Once the face scan is captured click on Next to proceed.




5. You will now be prompted to complete the ID Scan. Make sure to Fit the ID within the frame in the correct alignment and hold it steady to ensure the text and your final ID scan are readable. Click Start Scan to proceed.




6. If the ID scan is blurry click on Retake to capture again. Once the ID scan is captured click on Next to proceed.

 



7. For the knuckle scan, choose “Left Hand” or “Right Hand”, hold the back of either hand up to the webcam and try to fit it within the frame. Click “Scan”.

(Optional Step)***




8. Once the scan is complete, click “Re-Scan” if the scan is too blurry. Otherwise, click “Confirm” to complete the identification process.

(Optional Step)***



9. The Test Guidelines window shows the Proctoring or monitoring configurations and instructions on what is allowed during the exam. Read them carefully and click “START PROCTORING” to begin your proctoring session.

                                                                                 



10. a) Proctoring has now begun. A blue border will be placed around the screen as a reminder that Proctortrack is now in session. A prompt for the “Username” and “Password” should appear. The “UsernameandPassword(1) are displayed in the top right corner. Once they’ve been entered into the text boxes (2), click “Begin Assessment(3).




10. b) Sometimes the access code is hidden. If it is, follow the steps given below.

            You need to click on the “PASSWORD” present in the top right corner.



            Now click “COPY” on the “Exam Password” page.




10. c) Once the password is copied, click CLOSE” (1), and In the “Access code/Password”(2) field, right-click and then click “Paste” (or press CTRL + V in Windows/ Command +V for MAC OSX ) to paste the password for the exam. Click on “Begin Assessment”(3) to start the Test.



11.  a) Take the test while adhering to the aforementioned guidelines. While taking the test, feel free to move the camera feed (1) anywhere on the screen so that it stays out of the way of important functionality. After answering each question save the answer. After the test, it’s very important to remember to submit the test by clicking on “Submit for Grading”(2) and before clicking on “End” (3) to end the monitoring session.




11. b) Under the Assessment Submission Warning Page Click on “Submit for Grading” (1) to submit the test. Then Click the END’ (2) button on the top right corner to end the proctoring session.




12. Check the box next to “Yes, I have completed and submitted my test”, then click on “End”.



13. The session data will be automatically uploaded to Proctortrack servers.




14. The test session is complete! Either button seen here will close Proctortrack. Proctortrack will have to be run before each proctoring-enabled test. Click “QUIT APP” (1) to save the application for use with later tests, or click “Uninstall” (2) to remove Proctortrack from the current machine. Keep in mind that an opportunity to download Proctortrack will be given before each proctoring-enabled test.




Once you have completed the Onboarding quiz, you may check the status on the Proctortrack Dashboard:



1. Once the Onboarding is submitted, and is under processing it shows on the Proctortrack Dashboard as below.




2. Once the Onboarding is passed, the status on the Proctortrack Dashboard indicates the same. The Student will be able to take the Actual tests (the tests become active) once their Onboarding is passed.




3. The Students can view their Onboarding scan data under the “Onboarding” tab. They can click the “arrow” to scroll through the Face, ID, and Knuckle scan. The Onboarding tab clearly shows the date of the Onboarding as well as the Expiration date (each profile is valid for 1 year). The Students also have the option to take the Onboarding by clicking on the “Retake Onboarding Test” link.




4. To attempt any actual tests, the students are required to click on the “Go To Test” button for that particular test. The steps after that are the same as shown above (step 5 onwards).